document number: 94180 for tec hnical questions, contact: diodestech@vishay.com www.vishay.com revision: 04-mar-10 1 schottky rectifier, 3.0 a vs-30bq060pbf vishay high power products features ? small foot print, surface mountable ? very low forward voltage drop ? high frequency operation ? guard ring for enhanced ruggedness and long term reliability ? meets msl level 1, per j-std-020, lf maximum peak of 260 c ? compliant to rohs directive 2002/95/ec ? designed and qualified for industrial level description the vs-30bq060pbf surface mount schottky rectifier has been designed for applications requiring low forward drop and small foot prints on pc bo ards. typical applications are in disk drives, switching power supplies, converters, freewheeling diodes, battery charging, and reverse battery protection. product summary i f(av) 3.0 a v r 60 v cathode anode s mc major ratings and characteristics symbol characteristics values units i f(av) rectangular waveform 3.0 a v rrm 60 v i fsm t p = 5 s sine 1200 a v f 3.0 apk, t j = 125 c 0.52 v t j range - 55 to 150 c voltage ratings parameter symbol vs-30bq060pbf units maximum dc reverse voltage v r 60 v maximum working peak reverse voltage v rwm absolute maximum ratings parameter symbol test conditions values units maximum average forward current i f(av) 50 % duty cycle at t l = 123 c, rectangular waveform 3.0 a 50 % duty cycle at t l = 113 c, rectangular waveform 4.0 maximum peak one cycle non-repetitive surge current at t c = 25 c i fsm 5 s sine or 3 s rect. pulse following any rated load condition and with rated v rrm applied 1200 10 ms sine or 6 ms rect. pulse 130 non-repetitive avalanche energy e as t j = 25 c, i as = 1.0 a, l = 10 mh 5.0 mj repetitive avalanche current i ar current decaying linearly to zero in 1 s frequency limited by t j maximum v a = 1.5 x v r typical 1.0 a
www.vishay.com for technical questions, contact: diodestech@vishay.com document number: 94180 2 revision: 04-mar-10 vs-30bq060pbf vishay high power products schottky rectifier, 3.0 a note (1) pulse width < 300 s, duty cycle < 2 % notes (1) thermal runaway co ndition for a diode on its own heatsink (2) mounted 1" square pcb electrical specifications parameter symbol test conditions values units maximum forward voltage drop v fm (1) 3 a t j = 25 c 0.58 v 6 a 0.76 3 a t j = 125 c 0.52 6 a 0.66 maximum reverse leakage current i rm (1) t j = 25 c v r = rated v r 0.5 ma t j = 125 c 20 maximum junction capacitance c t v r = 5 v dc (test signal range 100 khz to1 mhz), 25 c 180 pf typical series inductance l s measured lead to lead 5 mm from package body 3.0 nh maximum voltage rate of change dv/dt rated v r 10 000 v/s thermal - mechanical specifications parameter symbol test conditions values units maximum junction temperature range t j (1) - 55 to 150 c maximum storage temperature range t stg maximum thermal resistance, junction to lead r thjl (2) dc operation 12 c/w maximum thermal resistance, junction to ambient r thja 46 approximate weight 0.24 g 0.008 oz. marking device case style smc (similar to do-214ab) v3h dp tot dt j ------------- 1 r thja -------------- <
document number: 94180 for tec hnical questions, contact: diodestech@vishay.com www.vishay.com revision: 04-mar-10 3 vs-30bq060pbf schottky rectifier, 3.0 a vishay high power products fig. 1 - maximum forward voltage drop characteristics (per leg) fig. 2 - typical values of reverse current vs. reverse voltage (per leg) fig. 3 - typical junction capacitance vs. reverse voltage (per leg) fig. 4 - maximum thermal impedance z thjc characteristics (per leg) 0.1 1 10 i f - instantaneous forward current (a) v fm - forward voltage drop (v) 0.1 0.3 0.6 0.8 0.9 0.7 0.4 0.2 0.5 t j = 150 c t j = 125 c t j = 25 c 0.001 0.01 0.1 1 10 100 i r - reverse current (ma) v r - reverse voltage (v) 10 30 60 40 20 0 50 t j = 125 c t j = 150 c t j = 100 c t j = 75 c t j = 50 c t j = 25 c 10 100 1000 c t - junction capacitance (pf) v r - reverse voltage (v) 10 30 60 70 40 20 0 50 t j = 25 c 0.01 0.1 1 10 100 0.00001 0.0001 0.001 0.01 0.1 1 10 t 1 - rectangular pulse duration (s) z thjc - thermal impedance (c/w) 100 single pulse thermal resistance) d = 0.75 d = 0.50 d = 0.33 d = 0.25 d = 0.20 p dm t 1 t 2 notes: 1. duty factor d = t 1 /t 2 2. peak t j = p dm x z thjc + t c
www.vishay.com for technical questions, contact: diodestech@vishay.com document number: 94180 4 revision: 04-mar-10 vs-30bq060pbf vishay high power products schottky rectifier, 3.0 a fig. 5 - maximum average forward current vs. allowable lead temperature fig. 6 - maximum average forward dissipation vs. average forward current fig. 7 - maximum peak surge forward current vs. pulse duration note (1) formula used: t c = t j - (pd + pd rev ) x r thjc ; pd = forward power loss = i f(av) x v fm at (i f(av) /d) (see fig. 6); pd rev = inverse power loss = v r1 x i r (1 - d); i r at v r1 = 80 % rated v r 70 80 90 100 110 120 130 140 160 150 allowable lead temperature (c) i f(av) - average forward current (a) 13 5 4 2 0 dc 80 % square wave (d = 0.50) see note (1) 0 0.5 1.0 1.5 2.0 2.5 average power loss (w) i f(av) - average power current (a) 0.5 1.5 3.0 4.5 3.5 4.0 2.0 1.0 0 2.5 dc rms limit d = 0.75 d = 0.50 d = 0.33 d = 0.25 d = 0.20 100 1000 i fsm - non-repetitive surge current (a) t p - square wave pulse duration (s) 10 000 1000 100 10 at any rated load condition and with rated v rrm applied following surge
document number: 94180 for tec hnical questions, contact: diodestech@vishay.com www.vishay.com revision: 04-mar-10 5 vs-30bq060pbf schottky rectifier, 3.0 a vishay high power products ordering information table 2 - current rating 3 - b = single lead diode 4 - q = schottky ?q? series 5 - voltage rating (060 = 60 v) 6 - none = box (1000 pieces) tr = tape and reel (3000 pieces) - pbf = lead (pb)-free 7 device code 5 13 24 67 vs- 30 b q 060 tr pbf 1 - hpp product suffix links to related documents dimensions www.vishay.com/doc?95023 part marking information www.vishay.com/doc?95029 packaging information tape and reel www.vishay.com/doc?95034 bulk www.vishay.com/doc?95397
document number: 95023 for technical questions concer ning discrete products, cont act: diodes-tech@vishay.com www.vishay.com revision: 05-nov-08 for technical qu estions concerning module products , contact: ind-modules@vishay.com 1 smc outline dimensions vishay high power products dimensions in millimeters (inches) 6.60 (0.260) 7.11 (0.2 8 0) 2.00 (0.079) 2.62 (0.103) 0.76 (0.030) 1.52 (0.060) 7.75 (0.305) 8 .13 (0.320) 0.102 (0.004) 0.203 (0.00 8 ) 0.152 (0.006) 0.305 (0.012) 5.59 (0.220) 6.22 (0.245) 4.69 max. (0.1 8 5 max.) 3.20 mi n . (0.126 mi n .) 1.52 mi n . (0.060 mi n .) 0.320 ref. 2.75 (0.10 8 ) 3.15 (0.124) 12 1 polarity part n u m b er 2 soldering pad
document number: 91 000 www.vishay.com revision: 11-mar-11 1 disclaimer legal disclaimer notice vishay all product, product specifications and data ar e subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicab le law, vishay disc laims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, incl uding without limitation specia l, consequential or incidental dama ges, and (iii) any and all impl ied warranties, including warran ties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of pro ducts for certain types of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in gene ric applications. such statements are not binding statements about the suitability of products for a partic ular application. it is the customers responsibility to validate that a particu lar product with the properties described in th e product specification is su itable for use in a particul ar application. parameters provided in datasheets an d/or specifications may vary in different applications and perfo rmance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product co uld result in person al injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding the design or manufact ure of the part. please contact authorized vishay personnel t o obtain written terms and conditions regarding products designed fo r such applications. no license, express or implied, by estoppel or otherwise, to any intelle ctual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
